Multiple wavelength InGaAs quantum dot lasers using selective area epitaxy

The authors demonstrate multiple wavelength lasers fabricated from InGaAsquantum dots. Selective area epitaxy is used to grow the active region, consisting of five layer stack of InGaAsquantum dots with different band gapenergies in selected regions of the substrate, for fabrication of the lasers. The mechanism responsible for engineering of the band gap of quantum dots is discussed. The performance of the selectively grown lasers is compared to the lasers fabricated from structures grown in a standard, nonselective area growth process.The Australian Research Council is gratefully acknowledged for financial support

The effect of manganese oxide on the sinterability of hydroxyapatite

The sinterability of manganese oxide (MnO2) doped hydroxyapatite (HA) ranging from 0.05 to 1 wt% was investigated. Green samples were prepared and sintered in air at temperatures ranging from 1000 to 1400 °C. Sintered bodies were characterized to determine the phase stability, grain size, bulk density, hardness, fracture toughness and Young's modulus. XRD analysis revealed that the HA phase stability was not disrupted throughout the sintering regime employed. In general, samples containing less than 0.5 wt% MnO2 and when sintered at lower temperatures exhibited higher mechanical properties than the undoped HA. The study revealed that all the MnO2-doped HA achieved >99% relative density when sintered at 1100–1250 °C as compared to the undoped HA which could only attained highest value of 98.9% at 1150 °C. The addition of 0.05 wt% MnO2 was found to be most beneficial as the samples exhibited the highest hardness of 7.58 GPa and fracture toughness of 1.65 MPam1/2 as compared to 5.72 GPa and 1.22 MPam1/2 for the undoped HA when sintered at 1000 °C. Additionally, it was found that the MnO2-doped samples attained E values above 110 GPa when sintered at temperature as low as 1000 °C if compared to 1050 °C for the undoped HA

Short-range correlations in dilute atomic Fermi gases with spin-orbit coupling

We study the short-range correlation strength of three dimensional spin half dilute atomic Fermi gases with spin-orbit coupling. The interatomic interaction is modeled by the contact pseudopotential. In the high temperature limit, we derive the expression for the second order virial expansion of the thermodynamic potential via the ladder diagrams. We further evaluate the second order virial expansion in the limit that the spin-orbit coupling constants are small, and find that the correlation strength between the fermions increases as the forth power of the spin-orbit coupling constants. At zero temperature, we consider the cases in which there are symmetric spin-orbit couplings in two or three directions. In such cases, there is always a two-body bound state of zero net momentum. In the limit that the average interparticle distance is much larger than the dimension of the two-body bound state, the system primarily consists of condensed bosonic molecules that fermions pair to form; we find that the correlation strength also becomes bigger compared to that in the absence of spin-orbit coupling. Our results indicate that generic spin-orbit coupling enhances the short-range correlations of the Fermi gases. Measurement of such enhancement by photoassociation experiment is also discussed.Comment: 7 pages, 4 figure

A heterotic sigma model with novel target geometry

We construct a (1,2) heterotic sigma model whose target space geometry consists of a transitive Lie algebroid with complex structure on a Kaehler manifold. We show that, under certain geometrical and topological conditions, there are two distinguished topological half--twists of the heterotic sigma model leading to A and B type half--topological models. Each of these models is characterized by the usual topological BRST operator, stemming from the heterotic (0,2) supersymmetry, and a second BRST operator anticommuting with the former, originating from the (1,0) supersymmetry. These BRST operators combined in a certain way provide each half--topological model with two inequivalent BRST structures and, correspondingly, two distinct perturbative chiral algebras and chiral rings. The latter are studied in detail and characterized geometrically in terms of Lie algebroid cohomology in the quasiclassical limit.Comment: 83 pages, no figures, 2 references adde

Impacts of Ageing Population on Monetary and Exchange Rate Managements in Singapore

This paper finds that the ageing of the population in Singapore will cause a reversal of the current net Central Provident Fund (CPF) contribution into a substantial net CPF withdrawal from 2025, with a peak occurring at 2035. The result is qualitatively robust to changes in the underlying assumptions of the projection. The paper then highlights the implications of this change on the exchange rate and monetary managements in Singapore. First, the Monetary Authority of Singapore (MAS)’s ability to influence Singapore’s exchange rate will be greatly hampered. Second, the net CPF withdrawal will mean sustained liquidity injection into (instead of the usual liquidity drain from) the economy. To avoid unnecessary inflation, the MAS has to find a sustainable way to mob up the excess liquidity due to the sustained liquidity injection. As a simple reversal of MAS’s current foreign exchange market operation will result in substantial shrinkage of foreign reserves, the paper proposes the issuance of government bonds to achieve the dual objectives of mobbing up the excess liquidity and avoiding the shrinkage of foreign reserves. This measure will also help the bond market development in Singapore. Finally, the paper proposes two other measures that can help maintain MAS’s influence on Singapore’s exchange rate to a reasonable level in the longer future.Ageing Population, Central Provident Fund, Exchange Rate System, Monetary Policy, Singapore.

Astrochemical confirmation of the rapid evolution of massive YSOs and explanation for the inferred ages of hot cores

Aims. To understand the roles of infall and protostellar evolution on the envelopes of massive young stellar objects (YSOs). Methods. The chemical evolution of gas and dust is traced, including infall and realistic source evolution. The temperatures are determined self-consistently. Both ad/desorption of ices using recent laboratory temperature-programmed-desorption measurements are included. Results. The observed water abundance jump near 100 K is reproduced by an evaporation front which moves outward as the luminosity increases. Ion-molecule reactions produce water below 100 K. The age of the source is constrained to t \~ 8 +/- 4 x 10^4 yrs since YSO formation. It is shown that the chemical age-dating of hot cores at ~ few x 10^3 - 10^4 yr and the disappearance of hot cores on a timescale of ~ 10^5 yr is a natural consequence of infall in a dynamic envelope and protostellar evolution. Dynamical structures of ~ 350AU such as disks should contain most of the complex second generation species. The assumed order of desorption kinetics does not affect these results.Comment: Accepted by A&A Letters; 4 pages, 5 figure

Implementation of Design Changes Towards a More Reliable, Hands-off Magnetron Ion Source

As the main $H^{-}$ ion source for the accelerator complex, magnetron ion sources have been used at Fermilab since the 1970s. At the offline test stand, new R&D is carried out to develop and upgrade the present magnetron-type sources of $H^{-}$ ions of up to 80 mA and 35 keV beam energy in the context of the Proton Improvement Plan. The aim of this plan is to provide high-power proton beams for the experiments at FNAL. In order to reduce the amount of tuning and monitoring of these ion sources, a new electronic system consisting of a current-regulated arc discharge modulator allow the ion source to run at a constant arc current for improved beam output and operation. A solenoid-type gas valve feeds $H_{2}$ gas into the source precisely and independently of ambient temperature. This summary will cover several studies and design changes that have been tested and will eventually be implemented on the operational magnetron sources at Fermilab. Innovative results for this type of ion source include cathode geometries, solenoid gas valves, current controlled arc pulser, cesium boiler redesign, gas mixtures of hydrogen and nitrogen, and duty factor reduction, with the aim to improve source lifetime, stability, and reducing the amount of tuning needed. In this summary, I will highlight the advances made in ion sources at Fermilab and will outline the directions of the continuing R&D effort.Comment: 4 pp. arXiv admin note: substantial text overlap with arXiv:1701.0175

An integrated wind risk warning model for urban rail transport in Shanghai, China

The integrated wind risk warning model for rail transport presented has four elements: Background wind data, a wind field model, a vulnerability model, and a risk model. Background wind data uses observations in this study. Using the wind field model with effective surface roughness lengths, the background wind data are interpolated to a 30-m resolution grid. In the vulnerability model, the aerodynamic characteristics of railway vehicles are analyzed with CFD (Computational Fluid Dynamics) modelling. In the risk model, the maximum value of three aerodynamic forces is used as the criteria to evaluate rail safety and to quantify the risk level under extremely windy weather. The full model is tested for the Shanghai Metro Line 16 using wind conditions during Typhoon Chan-hom. The proposed approach enables quick quantification of real- time safety risk levels during typhoon landfall, providing sophisticated warning information for rail vehicle operation safety